Hi Guys!
Have been reading alot of 'project' topics and pics of carts that are finish and that rly gets me exited to start my own projects in the future!
But before I can do that, I want to start small....
I want to burn roms to EPROM's and place it on a PCB. To do that i would need:
Willem EPROM Programmer PCB50B OR PRG-055 True-USB PRO GQ-4X Willem Programmer Light Pack
(I prefer USB because windows 7 support and no old ports..)
EPROM Eraser
15watt soldering Iron
45watt DE soldering iron
27c010 Eprom
32KB Games on: 27C256
Is this correct? I have some double carts that i can use as donor carts like: SMB 2, gauntlet II and excite bike)
I have some more, will list them later for comptabiliteit.
I want to start small, like open a cart, desolder the pins, get the EPROM out and put it back in. (I have no soldering experience, so i need some practise...)
After I get the hang of it i will order a 27C256 EPROM and burn a 32K game on it.
Is it correct that I need the same board as the 'original' game? And that if its just 32K I dont need to do any rewirering.
Like:
1943 128k PRG / 0k CHR H UNROM (2)
If i have a donor cart like:
Ducktales 128k PRG / 0k CHR V UNROM (2)
All i need to do is change the EPROM, right?
If this is correct this will be my start project, but I would like to know if the above is correct and the equipement is correct as well.
Thank you!
Greetings, Marcel
Have been reading alot of 'project' topics and pics of carts that are finish and that rly gets me exited to start my own projects in the future!
But before I can do that, I want to start small....
I want to burn roms to EPROM's and place it on a PCB. To do that i would need:
Willem EPROM Programmer PCB50B OR PRG-055 True-USB PRO GQ-4X Willem Programmer Light Pack
(I prefer USB because windows 7 support and no old ports..)
EPROM Eraser
15watt soldering Iron
45watt DE soldering iron
27c010 Eprom
32KB Games on: 27C256
Is this correct? I have some double carts that i can use as donor carts like: SMB 2, gauntlet II and excite bike)
I have some more, will list them later for comptabiliteit.
I want to start small, like open a cart, desolder the pins, get the EPROM out and put it back in. (I have no soldering experience, so i need some practise...)
After I get the hang of it i will order a 27C256 EPROM and burn a 32K game on it.
Is it correct that I need the same board as the 'original' game? And that if its just 32K I dont need to do any rewirering.
Like:
1943 128k PRG / 0k CHR H UNROM (2)
If i have a donor cart like:
Ducktales 128k PRG / 0k CHR V UNROM (2)
All i need to do is change the EPROM, right?
If this is correct this will be my start project, but I would like to know if the above is correct and the equipement is correct as well.
Thank you!
Greetings, Marcel