Hi all,
Thanks for looking at this post.
I'm trying to find way to dump SA1 chip SNES cartridge as easy as possible.
Long time ago, I found way to dump SNES games using Arduino in this website(http://hongkongarduino.web.fc2.com/).
Finally finished soldering of this Arduino shield today and successfully dumped some games.
This is very similar to CART_ROM_Reader which I can find it here:http://forum.arduino.cc/index.php?topic=158974.0
But I have one problem. I cannot dump any of SA1 chip games because this dumper do not support any of special chip games.
Searched through websites and I think I found way to dump SA1 games by using SuperCIC or SnesCIC and 21.477MHz clock to pin 1 according to these articles by skaman http://forum.arduino.cc/index.php?topic=158974.30
http://forums.nesdev.com/viewtopic.php?f=12&t=8617&start=15
Unfortunately, I do not have PIC writer nor any chip compatible with SuperCIC or SnesCIC.
So my questions is, is it possible to dump SA1 games by pulling out cables from actual SNES console and connect GND, pin 1(21.477MHz clock), pin 24(CIC out data p1), pin 25(CIC in data p7), pin 55(CIC out data p2), and pin 56(CIC in clock p6) to dumper's corresponding pins?
I think this will work by power up dumper+cartridge first than console next to unlock CIC...
Or should I buy PIC writer and make SuperCIC or SnesCIC?
Thanks,
Tamanegi
Thanks for looking at this post.
I'm trying to find way to dump SA1 chip SNES cartridge as easy as possible.
Long time ago, I found way to dump SNES games using Arduino in this website(http://hongkongarduino.web.fc2.com/).
Finally finished soldering of this Arduino shield today and successfully dumped some games.
This is very similar to CART_ROM_Reader which I can find it here:http://forum.arduino.cc/index.php?topic=158974.0
But I have one problem. I cannot dump any of SA1 chip games because this dumper do not support any of special chip games.
Searched through websites and I think I found way to dump SA1 games by using SuperCIC or SnesCIC and 21.477MHz clock to pin 1 according to these articles by skaman http://forum.arduino.cc/index.php?topic=158974.30
http://forums.nesdev.com/viewtopic.php?f=12&t=8617&start=15
Unfortunately, I do not have PIC writer nor any chip compatible with SuperCIC or SnesCIC.
So my questions is, is it possible to dump SA1 games by pulling out cables from actual SNES console and connect GND, pin 1(21.477MHz clock), pin 24(CIC out data p1), pin 25(CIC in data p7), pin 55(CIC out data p2), and pin 56(CIC in clock p6) to dumper's corresponding pins?
I think this will work by power up dumper+cartridge first than console next to unlock CIC...
Or should I buy PIC writer and make SuperCIC or SnesCIC?
Thanks,
Tamanegi