---- SOLVED ----
SUCCESS !!!!!!!!!!!!!!
Lol ! It's done!!!
I want to share the problem, and the solution.
2 problems:
1) Soldering iron was trasmiting current to the board. (got new one)
2) I read on tutorials to only use 0.97ja to complete this task. Well, This didn't work, 8 eproms were used, and only the last 2 worked.
2) I used version supplied with hardware, and it worked.
Here are pictures of the final work !!! This is Rock'n Roll Racing. Zelda was done as well !
Thanks for all the hints and stuff mates. I hope this can help some one.
---- SOLVED ----
----Original Post Below----
Hello there guys, how are you?
I am new here, hello everyone.
I don't know what I did wrong, maybe you guys can give me a light.
I got the Willem burner, and 10 27c801 eproms.
I checked if it was empty, yes it was, all FF, etc.
1)I desoldered street fighter 2 maskrom.
2)I dragged Rock'n roll racing to bankswap.exe
It created a bin file.
3)I burned bin file to eprom.
4)I soldered eprom to cartridge, alighned it to left(Looking at eprom, snes connectors down). The right hand points on the cart were left empty.
5)
------------------------- <EPRON
-------------------------
||||||||||||||| << Snes pin Connectors.
From right to left, I lifted the 2nd and 9th lower legs of eprom.
Soldered a wire to each. Soldered 9th where 2nd belonged, and 2nd, where 9th belonged.
With a big smile on my face, turned snes on and got a black screen.
Conclusion. I Failed.
I rolled back a few steps, read a few things.
I read on a tutorial, when burning rom to eprom, I needed to change the J3 jumper default position. Change it o the 2nd pin from A23 so it's connecting 2nd and 3rd pin.
Also, I realised SF2 is slowrom, and rock'n roll racing is fast rom.
SF2 16mbit, rockin roll 8mbit.
Any ideas?
Thanks mates.
--------EDIT--------
Some more reading, I will the the instructions below, mine were differen.
http://www.mcumall.com/support/27C801.jpg
SUCCESS !!!!!!!!!!!!!!
Lol ! It's done!!!
I want to share the problem, and the solution.
2 problems:
1) Soldering iron was trasmiting current to the board. (got new one)
2) I read on tutorials to only use 0.97ja to complete this task. Well, This didn't work, 8 eproms were used, and only the last 2 worked.
2) I used version supplied with hardware, and it worked.
Here are pictures of the final work !!! This is Rock'n Roll Racing. Zelda was done as well !
Thanks for all the hints and stuff mates. I hope this can help some one.
---- SOLVED ----
----Original Post Below----
Hello there guys, how are you?
I am new here, hello everyone.
I don't know what I did wrong, maybe you guys can give me a light.
I got the Willem burner, and 10 27c801 eproms.
I checked if it was empty, yes it was, all FF, etc.
1)I desoldered street fighter 2 maskrom.
2)I dragged Rock'n roll racing to bankswap.exe
It created a bin file.
3)I burned bin file to eprom.
4)I soldered eprom to cartridge, alighned it to left(Looking at eprom, snes connectors down). The right hand points on the cart were left empty.
5)
------------------------- <EPRON
-------------------------
||||||||||||||| << Snes pin Connectors.
From right to left, I lifted the 2nd and 9th lower legs of eprom.
Soldered a wire to each. Soldered 9th where 2nd belonged, and 2nd, where 9th belonged.
With a big smile on my face, turned snes on and got a black screen.
Conclusion. I Failed.
I rolled back a few steps, read a few things.
I read on a tutorial, when burning rom to eprom, I needed to change the J3 jumper default position. Change it o the 2nd pin from A23 so it's connecting 2nd and 3rd pin.
Also, I realised SF2 is slowrom, and rock'n roll racing is fast rom.
SF2 16mbit, rockin roll 8mbit.
Any ideas?
Thanks mates.
--------EDIT--------
Some more reading, I will the the instructions below, mine were differen.
http://www.mcumall.com/support/27C801.jpg