Hey guys,
I'm having trouble with a Snow Brothers repro I'm working on (PAL-B).
I'm fairly new to repros, so far I've only done two for the SNES (Sunset Riders and Battletoads & Double Dragon), this is my first NES one.
I used the following wiring guide:
PRG socket:
Bend up pins 1, 2, 24, 30 and 31 (or cut tracks)
Solder pin 2 to hole 24 (A16)
Solder pin 24 to GND (OE) (I used Pin16 on the back)
Solder pin 30 to hole 1 (A17)
CHR socket:
Bend up pins 1, 2, 22, 24, 30 and 31 (or cut tracks)
Solder pin 2 to hole 24 (A16)
Solder pin 22 to hole 31 (CE or CHR /A13)
Solder pin 24 to hole 2 (OE or CHR /RD)
As a donor I used Racket Attack (PAL-B): http://bootgod.dyndns.org:7777/profile.php?id=4714
I cannot start the game however. I checked the wiring multiple times and cannot find any mistake. Is Racket Attack maybe the wrong donor? I'm not sure about the mirroring, I guess that Snow Brothers is vertical while Racket Attack is horizontal, even though I though it doesn't matter with Mapper Ctrl.
Can someone help me out? Are there maybe noobie mistakes I'#m missing, like not enough solder etc.?
I'm having trouble with a Snow Brothers repro I'm working on (PAL-B).
I'm fairly new to repros, so far I've only done two for the SNES (Sunset Riders and Battletoads & Double Dragon), this is my first NES one.
I used the following wiring guide:
PRG socket:
Bend up pins 1, 2, 24, 30 and 31 (or cut tracks)
Solder pin 2 to hole 24 (A16)
Solder pin 24 to GND (OE) (I used Pin16 on the back)
Solder pin 30 to hole 1 (A17)
CHR socket:
Bend up pins 1, 2, 22, 24, 30 and 31 (or cut tracks)
Solder pin 2 to hole 24 (A16)
Solder pin 22 to hole 31 (CE or CHR /A13)
Solder pin 24 to hole 2 (OE or CHR /RD)
As a donor I used Racket Attack (PAL-B): http://bootgod.dyndns.org:7777/profile.php?id=4714
I cannot start the game however. I checked the wiring multiple times and cannot find any mistake. Is Racket Attack maybe the wrong donor? I'm not sure about the mirroring, I guess that Snow Brothers is vertical while Racket Attack is horizontal, even though I though it doesn't matter with Mapper Ctrl.
Can someone help me out? Are there maybe noobie mistakes I'#m missing, like not enough solder etc.?