Ive had this Snes Jr for a few months, when i got it it didnt turn on so i opened the shell to check what was going on and saw that someone had already tried to fix it.
There was a bridge where the fuse is supposed to be, and there was no 7805 regulator, whoever worked on this broke 3 pads on both sides of the board, looking at the 7805 from the back of the console, broken pads are the center one which i think is the ground, and the right one which i believe is the voltage output.
Can anyone help me figure out where to solder the pins directly to the board to see if it actually works? looks like an easy wiring to feed voltage to it, ground pin i can solder pretty much to any of the caps, but the input and output i dont know where to solder to and i dont have any other Snes Jr to compare it to.
Thanks in advace, some pics i took
https://imgur.com/a/DKnRq6J
There was a bridge where the fuse is supposed to be, and there was no 7805 regulator, whoever worked on this broke 3 pads on both sides of the board, looking at the 7805 from the back of the console, broken pads are the center one which i think is the ground, and the right one which i believe is the voltage output.
Can anyone help me figure out where to solder the pins directly to the board to see if it actually works? looks like an easy wiring to feed voltage to it, ground pin i can solder pretty much to any of the caps, but the input and output i dont know where to solder to and i dont have any other Snes Jr to compare it to.
Thanks in advace, some pics i took
https://imgur.com/a/DKnRq6J