This is my second attempt at making one and, sadly, I get the blue screen of death. I followed the directions from the "Using EPROMs in place of NES Mask ROMS" text.
I checked my EPROM to make sure FF1 (for test) was programmed to it correctly. I'm not sure what I did wrong....
Here's a picture I scanned. (Note: Best picture I could produce)
I got some solder on the copper and cleaned it off as best as possible.
http://mbrenaman.com/board.jpg
Maybe some can see the problem?? Beacuse I'm lost.
I checked my EPROM to make sure FF1 (for test) was programmed to it correctly. I'm not sure what I did wrong....
Here's a picture I scanned. (Note: Best picture I could produce)
I got some solder on the copper and cleaned it off as best as possible.
http://mbrenaman.com/board.jpg
Maybe some can see the problem?? Beacuse I'm lost.