Well I'm finally done dumping all my carts. I ended up with 1 more with no plugin for. I had never even heard of this one, but here's a little bit about it.
This board is quite different from other Tengen boards. Most of them use either the MIMIC-1 (337001) or RAMBO-1 (337006). This one uses one labeled 337007.
It has 1 128K PRG ROM and 2 128K CHR ROMs (marked CHL and CHH). The Rabbit CIC clone (337002) is not integrated into the mapper as in the RAMBO-1. There is also a 74LS02 on board.
This board is from the game "After Burner". I looked up the existing dumps mapper number, 68, which is some little used jap Sunsoft board. Out of curiosity, I wrote up a plugin as if it were for the Sunsoft board, and luckily it works on the Tengen board.
Anyways, here is the plugin the board. It should work on the few jap carts that use the Sunsoft version as well.
I don't have a digital camera handy, so I scanned the board. Quality is not so great though as it ended up with quite a bit of depth-of-field action.
Btw, is this a case where UNIF should store the CHR ROM in the file as 2 parts just because it's 2 ROMs on the board?
This board is quite different from other Tengen boards. Most of them use either the MIMIC-1 (337001) or RAMBO-1 (337006). This one uses one labeled 337007.
It has 1 128K PRG ROM and 2 128K CHR ROMs (marked CHL and CHH). The Rabbit CIC clone (337002) is not integrated into the mapper as in the RAMBO-1. There is also a 74LS02 on board.
This board is from the game "After Burner". I looked up the existing dumps mapper number, 68, which is some little used jap Sunsoft board. Out of curiosity, I wrote up a plugin as if it were for the Sunsoft board, and luckily it works on the Tengen board.
Anyways, here is the plugin the board. It should work on the few jap carts that use the Sunsoft version as well.
I don't have a digital camera handy, so I scanned the board. Quality is not so great though as it ended up with quite a bit of depth-of-field action.
Btw, is this a case where UNIF should store the CHR ROM in the file as 2 parts just because it's 2 ROMs on the board?