Originally posted by: rlh
I know all boxes aren't cut equally, but how are you opening these? I've found sliding in the backside of a butter knife or then plastic/metal, and then pressing firmly and squarely against the fold 95% of the times allows you to open boxed items without damaging them.
But, like I said, not all box cuts are the same. If the little flaps cover the cut edges, you have to get careful and crafty and moving the cardboard around. I hate boxes for this very reason. When the fold in the middle of the wide tab, it just agitates me to no end.
I do something similar. I slide a knife in from the side of the top flap (or both sides if necessary) and then apply upward pressure evenly throughout the flap. This usually works, although occasionally I also get a bend or tear. Those little cuts on the left and right flaps can totally screw you over.