Hello, I've got a copy of Megaman X3 that I've had for a long time. Unfortunately, previous to my owning it, it was a rental, and is in fairly poor shape. Beyond the extreme label damage, I am most concerned with the rear half of the shell. At some point, the small bit of plastic that held one side of the PCB in place was chipped off.
This damage causes the PCB to go into the SNES at an angle, and while it is has never been at a harsh enough angle to prevent proper operation, I now feel that it is time to do something to ensure the cart securely holds the PCB down in order to prevent further damage, either to the remaining part of the shell, or perhaps to the PCB itself.
I would rather enact repairs, but I am open to swapping rears if there are rears compatible with the MMX3 board.
Here is an image of the damage in question. It's fairly minor, but it is enough to prevent the PCB from being securely locked in place. Any help would be appreciated.