NintendoAge http://nintendoage.com/forum/ -Sqooner Looking for eprom sockets to test repros http://nintendoage.com/forum/messageview.cfm?catid=8&threadid=181171 2018-04-04T13:44:45 -05.00 StudyHallPanic#@! 8 Looking for eprom sockets to test repros http://nintendoage.com/forum/messageview.cfm?catid=8&threadid=181171 2018-04-04T10:44:49 -05.00 StudyHallPanic#@! 8 Originally posted by: SNESNESCUBE64

Originally posted by: StudyHallPanic#@!
 
Originally posted by: SNESNESCUBE64

The second link will work for 32 pin eproms. The important thing to keep in mind it the package type. 27C512 is a DIP-28 package, so the first link will not fit. The spacing found in the second link looks correct, I would base the spacing for the 28 pin based off of that.



This one has the same 15.24mm spacing as the DIP32. Look OK to you? www.digikey.com/product-detail/en/mill-max-manufacturing-cor...

Looks like it will work to me. I got my info from a 27C512 datasheet. Here is what I'm Basing my spacings off of.

 


Great. Thanks so much for the advice. ]]> Looking for eprom sockets to test repros http://nintendoage.com/forum/messageview.cfm?catid=8&threadid=181171 2018-04-04T10:35:37 -05.00 StudyHallPanic#@! 8 Originally posted by: StudyHallPanic#@!
 
Originally posted by: SNESNESCUBE64

The second link will work for 32 pin eproms. The important thing to keep in mind it the package type. 27C512 is a DIP-28 package, so the first link will not fit. The spacing found in the second link looks correct, I would base the spacing for the 28 pin based off of that.



This one has the same 15.24mm spacing as the DIP32. Look OK to you? www.digikey.com/product-detail/en...
Looks like it will work to me. I got my info from a 27C512 datasheet. Here is what I'm Basing my spacings off of.

  ]]> Looking for eprom sockets to test repros http://nintendoage.com/forum/messageview.cfm?catid=8&threadid=181171 2018-04-04T10:24:05 -05.00 StudyHallPanic#@! 8 Originally posted by: SNESNESCUBE64

The second link will work for 32 pin eproms. The important thing to keep in mind it the package type. 27C512 is a DIP-28 package, so the first link will not fit. The spacing found in the second link looks correct, I would base the spacing for the 28 pin based off of that.


This one has the same 15.24mm spacing as the DIP32. Look OK to you? www.digikey.com/product-detail/en/mill-max-manufacturing-corp/110-41-628-41-001000/ED90520-ND/2538108 ]]> Looking for eprom sockets to test repros http://nintendoage.com/forum/messageview.cfm?catid=8&threadid=181171 2018-04-04T08:56:44 -05.00 StudyHallPanic#@! 8 Originally posted by: BouncekDeLemos

I've never tried this, but I've always wanted to use one of those 'snappable' socket line dealios.

https://www.allelectronics.com/it...

Just cut off any access, or cut off any amount you need, tack them through the vias, and there you go.
These work wonderfully. I've used these at work when we didn't have the correck socket size. ]]> Looking for eprom sockets to test repros http://nintendoage.com/forum/messageview.cfm?catid=8&threadid=181171 2018-04-04T08:53:24 -05.00 StudyHallPanic#@! 8
https://www.allelectronics.com/item/sip-30/30-pin-hi-rel-sip-socket-0.1-ctrs-snappable/1.html

Just cut off any access, or cut off any amount you need, tack them through the vias, and there you go. ]]> Looking for eprom sockets to test repros http://nintendoage.com/forum/messageview.cfm?catid=8&threadid=181171 2018-04-04T08:41:01 -05.00 StudyHallPanic#@! 8 Looking for eprom sockets to test repros http://nintendoage.com/forum/messageview.cfm?catid=8&threadid=181171 2018-04-04T08:21:32 -05.00 StudyHallPanic#@! 8