http://nintendoage.com/forum/ -Sqooner http://nintendoage.com/forum/messageview.cfm?catid=5&threadid=464 2007-03-01T19:15:53 -05.00 BootGod 8
~~NGD ]]> http://nintendoage.com/forum/messageview.cfm?catid=5&threadid=464 2007-03-01T15:19:46 -05.00 BootGod 8 That is a unique Tengen pcb, none of their other games use that one. It would be cool to know the PCB name, which should be on the back of it, most likely something like 8000xx

Looks like it would be possible to use an UNROM pcb as a base, might need some rewiring to the 161/32 unless Tengen used it exactly the same way.

Yes, where is that ROM dammit! ]]> http://nintendoage.com/forum/messageview.cfm?catid=5&threadid=464 2007-03-01T00:22:37 -05.00 BootGod 8 Yes there are two pcb pictures in there. It is clear the two mapper chips are a 74161 and a 7432 and it uses 8KB sram. Those chips are the same as the Nintendo UNROM, a very common mapper. The 27C010 eprom chip is also a common 128KB which is the max the UNROM board supports. Now someone just needs to make the rom publically available...

*blatent advertising* Wii NES RetroPorts now available! Use real NES controllers on Virtual Console! www.retrousb.com ]]> http://nintendoage.com/forum/messageview.cfm?catid=5&threadid=464 2007-02-28T23:32:15 -05.00 BootGod 8
I know you haven't been buying much, cause I havent seen you outbid me in a while You were a buying machine there for a while.

BTW-- I bought one of your retroUSB ports and man that baby works great. Well worth the cash IMO. I use it everday to take screenshots for this site.
~~NGD ]]> http://nintendoage.com/forum/messageview.cfm?catid=5&threadid=464 2007-02-28T23:25:38 -05.00 BootGod 8 Ive been reading these forums for a while but apparently never registered... Havent been buying too much recently, mostly just looking for perfect black box games and gray nwc.

Was there a site with the Airball pcb picts? I just remember the board looked somewhat transparent. Only reference I have found to it being a complicated board is the nesworld interview ( http://www.nesworld.com/hindorff.htm ) It isnt really clear what part was custom, could have just meant it was a generic mapper but one Tengen hadn't used before. Or the protos do not use the final hardware and are just incomplete. Easy way would be to have one of the repro buyers open up the cart. I would bet inside it is just a plain Tengen or Nintendo production board with eproms wired up. ]]> http://nintendoage.com/forum/messageview.cfm?catid=5&threadid=464 2007-02-28T19:02:49 -05.00 BootGod 8

afaik the Airball Rom's are not released and there are only like 3-4 known copies of it to exist in proto form. Then we have seen a handful of repros, 2-3 I think.
~~NGD ]]> http://nintendoage.com/forum/messageview.cfm?catid=5&threadid=464 2007-02-28T15:55:49 -05.00 BootGod 8 http://nintendoage.com/forum/messageview.cfm?catid=5&threadid=464 2007-02-27T23:57:34 -05.00 BootGod 8