Hello, new here and was wondering if someone could point me in the right direction dumping my carts...
I decided to start with Super Mario Bros. , I modified the inlretro.lua script.
Line 64 -- unremarked, set to use the nes.nrom (which I believe is used for no mapper present) http://bootgod.dyndns.org:7777/profile.php?id=270
Line 105 -- unremarked, to use NES and ensured all others are remarked out
Set the process options starting on line 119 to:
I didn't change any of the lines starting with 137 since it looked as if based on the comment on line 185 that it would autodetect
Here is the output after running.
It sat on dumping and took 9min, which seems like a very long time to output a 32kb file. Am I doing this right? I am not sure how to add the header info to test, can someone point me in the right direction?
I decided to start with Super Mario Bros. , I modified the inlretro.lua script.
Line 64 -- unremarked, set to use the nes.nrom (which I believe is used for no mapper present) http://bootgod.dyndns.org:7777/profile.php?id=270
Line 105 -- unremarked, to use NES and ensured all others are remarked out
Set the process options starting on line 119 to:
Code:
local process_opts = {
test = true,
read = true,
erase = false,
program = false,
verify = false,
dumpram = false,
writeram = false,
dump_filename = "dump.bin",
flash_filename = "flash.bin",
verify_filename = "verifyout.bin",
dumpram_filename = "ramdump.bin",
writeram_filename = "",
test = true,
read = true,
erase = false,
program = false,
verify = false,
dumpram = false,
writeram = false,
dump_filename = "dump.bin",
flash_filename = "flash.bin",
verify_filename = "verifyout.bin",
dumpram_filename = "ramdump.bin",
writeram_filename = "",
I didn't change any of the lines starting with 137 since it looked as if based on the comment on line 185 that it would autodetect
Code:
local console_opts = {
mirror = nil, -- Only used by latest INL discrete flash boards, set to "H" or "V" to change board mirroring
prg_rom_size_kb = 256 * 128, -- Size of NES PRG-ROM in KByte
chr_rom_size_kb = 8, -- Size of NES CHR-ROM in KByte
wram_size_kb = 0, -- Size of NES PRG-RAM/WRAM in KByte
rom_size_kbyte = 8 * 128, -- Size of ROM in kilobytes, used for non-NES consoles.
-- If more convienient, specifying size in megabits is also supported.
-- rom_size_kbyte = 8, -- Size of ROM in megabits, used for non-NES consoles.
mirror = nil, -- Only used by latest INL discrete flash boards, set to "H" or "V" to change board mirroring
prg_rom_size_kb = 256 * 128, -- Size of NES PRG-ROM in KByte
chr_rom_size_kb = 8, -- Size of NES CHR-ROM in KByte
wram_size_kb = 0, -- Size of NES PRG-RAM/WRAM in KByte
rom_size_kbyte = 8 * 128, -- Size of ROM in kilobytes, used for non-NES consoles.
-- If more convienient, specifying size in megabits is also supported.
-- rom_size_kbyte = 8, -- Size of ROM in megabits, used for non-NES consoles.
Here is the output after running.
Code:
C:\INL-retro-progdump-master\host>inlretro.exe -s scripts\inlretro.lua
Successfully found and connected to INL retro-prog
Device firmware version: 2.3.x
Testing NROM
attempting to detect NES/FC mapper via mirroring...
vertical mirroring sensed
EXP0 pull-up test: 10
reading PRG-ROM manf ID
attempted read PRG-ROM manf ID: 78
attempted read PRG-ROM prod ID: D8
reading CHR-ROM manf ID
attempted read CHR-ROM manf ID: 3
attempted read CHR-ROM prod ID: F
Dumping PRG & CHR ROMs...
DONE Dumping PRG & CHR ROMs
Successfully found and connected to INL retro-prog
Device firmware version: 2.3.x
Testing NROM
attempting to detect NES/FC mapper via mirroring...
vertical mirroring sensed
EXP0 pull-up test: 10
reading PRG-ROM manf ID
attempted read PRG-ROM manf ID: 78
attempted read PRG-ROM prod ID: D8
reading CHR-ROM manf ID
attempted read CHR-ROM manf ID: 3
attempted read CHR-ROM prod ID: F
Dumping PRG & CHR ROMs...
DONE Dumping PRG & CHR ROMs
It sat on dumping and took 9min, which seems like a very long time to output a 32kb file. Am I doing this right? I am not sure how to add the header info to test, can someone point me in the right direction?