Hello,
This is my first time on this site so hopefully someone can help me out. I'm pretty new to all of this and I'm working on some boards I do not know the pinouts of, nor can I find anything online about them. The boards I'm working on are as follows: AOROM, TLSROM, SLRROM, SKROM, UOROM I'm ready to put the chips onto the boards but I'm unsure which ones to bend up and to connect to which holes. I'm fine with all the other boards but I cannot seem to find hardly any info on these ones at all. Here are the boards and the chips I will be using if anyone can provide me with the info that I seek.
AOROM - I will be using a 27C020
UOROM - I will be using a 27C020
TLSROM - I will be using a 27C010
SKROM - I will be using a 27C010
SLRROM - I will be using a 27C010
With the AOROM board I did find a pinout but it seems that it has an extra CE pin for bus conflicts at hole 31 and I'm not sure where to route the wire from this hole. I'm assuming it will be ground or +5V but I'm unsure where and what pin to put it to. Any help is very appreciated.
Thanks.
This is my first time on this site so hopefully someone can help me out. I'm pretty new to all of this and I'm working on some boards I do not know the pinouts of, nor can I find anything online about them. The boards I'm working on are as follows: AOROM, TLSROM, SLRROM, SKROM, UOROM I'm ready to put the chips onto the boards but I'm unsure which ones to bend up and to connect to which holes. I'm fine with all the other boards but I cannot seem to find hardly any info on these ones at all. Here are the boards and the chips I will be using if anyone can provide me with the info that I seek.
AOROM - I will be using a 27C020
UOROM - I will be using a 27C020
TLSROM - I will be using a 27C010
SKROM - I will be using a 27C010
SLRROM - I will be using a 27C010
With the AOROM board I did find a pinout but it seems that it has an extra CE pin for bus conflicts at hole 31 and I'm not sure where to route the wire from this hole. I'm assuming it will be ground or +5V but I'm unsure where and what pin to put it to. Any help is very appreciated.
Thanks.