Hey you NES-Gurus!
A friend of mine asked me to build a repro cart of the rare game "Dooly Bravo Land" (Korea only release).
Nestopia gives me the following information:
________________________________
Soft-patched: No
CRC: 86BE4746
SHA-1: 6AAA5521F91F101448E77C996C9802015578400C
System: NES-NTSC
Board: CAMERICA BF9093, Mapper 71
PRG-ROM: 256k
V-RAM: 8k
Solder Pad: H:1 V:0
Battery: No
Dump: Unknown
________________________________
As a donor cartridge i chose MIG-29/Camerica:
http://bootgod.dyndns.org:7777/profile.php?id=218
this should work i guess!?
I successfully built a good handful of repros in the past but have my problems with this one.
Do you have any hints how to rewire the PRG-EPROM?
Or is this Camerica-PCB a very special one that cannot be used as a donor?
A friend of mine asked me to build a repro cart of the rare game "Dooly Bravo Land" (Korea only release).
Nestopia gives me the following information:
________________________________
Soft-patched: No
CRC: 86BE4746
SHA-1: 6AAA5521F91F101448E77C996C9802015578400C
System: NES-NTSC
Board: CAMERICA BF9093, Mapper 71
PRG-ROM: 256k
V-RAM: 8k
Solder Pad: H:1 V:0
Battery: No
Dump: Unknown
________________________________
As a donor cartridge i chose MIG-29/Camerica:
http://bootgod.dyndns.org:7777/profile.php?id=218
this should work i guess!?
I successfully built a good handful of repros in the past but have my problems with this one.
Do you have any hints how to rewire the PRG-EPROM?
Or is this Camerica-PCB a very special one that cannot be used as a donor?