Hello all.
Firstly, I would like to say that english is not my natural language. So, sorry my future mistakes.
I'm purchasing a copy of an original japanese Final Fantasy 3 60pins, and, with it in hands, I will try burn an eprom with the translated ROM for my own use.
I've noticed there is no CHR ROM, only a 512KiB PRG ROM (32 x 16KiB).
I was wondering two things:
1 - The only eprom I will need to burn is that PRG? The others 2 (of 3) chips on the original board doesn't need to be removed?
2 - Anyone knows about REWIRING on this board? I will probably need to do this, right? On Nesdev I just found how to rewiring "TKROM -> TNROM conversion (mapper 4)". I know that FF3 uses TNROM, it's the right conversion?
I will put the PCB scan here too: http://bootgod.dyndns.org:7777/image.php?ImageID=3830
Thank you very much.
Firstly, I would like to say that english is not my natural language. So, sorry my future mistakes.
I'm purchasing a copy of an original japanese Final Fantasy 3 60pins, and, with it in hands, I will try burn an eprom with the translated ROM for my own use.
I've noticed there is no CHR ROM, only a 512KiB PRG ROM (32 x 16KiB).
I was wondering two things:
1 - The only eprom I will need to burn is that PRG? The others 2 (of 3) chips on the original board doesn't need to be removed?
2 - Anyone knows about REWIRING on this board? I will probably need to do this, right? On Nesdev I just found how to rewiring "TKROM -> TNROM conversion (mapper 4)". I know that FF3 uses TNROM, it's the right conversion?
I will put the PCB scan here too: http://bootgod.dyndns.org:7777/image.php?ImageID=3830
Thank you very much.