drac's night out ok I have a slrom board I cut the but I am trouble with the
wiring this says to
SLROM (mapper 1):
PRG socket:
Bend up pins 1, 2, 24, 30 and 31 (or cut tracks)
Solder pin 2 to hole 24 (A16)
Solder pin 24 to GND (OE)
Solder pin 30 to hole 1 (A17)
CHR socket:
Bend up pins 1, 2, 22, 24, 30 and 31 (or cut tracks)
Solder pin 2 to hole 24 (A16)
Solder pin 22 to hole 31 (CE or CHR /A13)
Solder pin 24 to hole 2 (OE or CHR /RD)
prg socket
will I cut the tracks to 1,2,24,30 and 31
but I cant Solder pin 2 to hole 24 (A16) because theres no hole do I
just solder it to the pin 24 or some were else
same thing with pin 24 to ground and pin 30 to hole 1
anybody know
wiring this says to
SLROM (mapper 1):
PRG socket:
Bend up pins 1, 2, 24, 30 and 31 (or cut tracks)
Solder pin 2 to hole 24 (A16)
Solder pin 24 to GND (OE)
Solder pin 30 to hole 1 (A17)
CHR socket:
Bend up pins 1, 2, 22, 24, 30 and 31 (or cut tracks)
Solder pin 2 to hole 24 (A16)
Solder pin 22 to hole 31 (CE or CHR /A13)
Solder pin 24 to hole 2 (OE or CHR /RD)
prg socket
will I cut the tracks to 1,2,24,30 and 31
but I cant Solder pin 2 to hole 24 (A16) because theres no hole do I
just solder it to the pin 24 or some were else
same thing with pin 24 to ground and pin 30 to hole 1
anybody know