Subject line says the problem. Kazzo has been working fine (for the most part) for about a year. All of a sudden, today, it decided to stop working.
- Using Windows 10
- Tried loading the Microsoft OS with driver signature enforcement disabled, tried loading with it enabled
- Tried unplugging and replugging-in the dumper
- Tried two different computers
- Tried different cables
- Every time, Windows says "the last USB device you connected malfunctioned, and Windows does not recognize it"
- Anago always displays a Reader open error message
- Vendor ID and product ID for the device read "0x0000" and "0x0002" respectively
- Been using the Kazzo for over a year; recently replaced the part where you plug the cable in (yay, soldering practice for the n00b!), and even after that it worked
Is anyone willing to help diagnose/resolve the problem?
- Using Windows 10
- Tried loading the Microsoft OS with driver signature enforcement disabled, tried loading with it enabled
- Tried unplugging and replugging-in the dumper
- Tried two different computers
- Tried different cables
- Every time, Windows says "the last USB device you connected malfunctioned, and Windows does not recognize it"
- Anago always displays a Reader open error message
- Vendor ID and product ID for the device read "0x0000" and "0x0002" respectively
- Been using the Kazzo for over a year; recently replaced the part where you plug the cable in (yay, soldering practice for the n00b!), and even after that it worked
Is anyone willing to help diagnose/resolve the problem?