Hi Gents,
Could I kindly request some clarification or first hand experience regarding the below, I have asked Jian from buyicnow.com but not getting anywhere. Long story short I have a TL866 with the Tsop40A adapter and its giving me loads of errors and problems so I am looking for alternative ways to program my MBM29F033C-90PTN, 29F032B, and 29F016B tsop40 chips
OK so, I have purchased the below adapter with the intention of using with MBM29F033C-90PTN, 29F032B, and 29F016B Tsop40's
SOP Adapter III
http://www.buyicnow.com/it.php?i=396
Q1: Looking at the pictures for the use with 29F016B, there appears to be a solder bridge of some kind on R3, is this required to program/operate the 29F016B only?
I am planning to purchase a GQ-4X which is a Willem cos of my issues with the TL866/Tsop40A combo
Q2: They have a Willem programmer board available, which would I need to use in order to program the chips on the SOP adapter board III as they have 3 types of "DIP40-DIP36 Programmer Adapters"?
How is this connected or wired in order to program?
Q3: I also have a TSOP-willem board from https://oshpark.com/shared_projects/Et6HIToH can I use this instead with the SOP Adapter III?
Q4: What would be the easiest way to program a SOP Adapter III myself?
Q5: Is there a way to program SOP Adapter III on a TL866CS?
Thanks
MS
Could I kindly request some clarification or first hand experience regarding the below, I have asked Jian from buyicnow.com but not getting anywhere. Long story short I have a TL866 with the Tsop40A adapter and its giving me loads of errors and problems so I am looking for alternative ways to program my MBM29F033C-90PTN, 29F032B, and 29F016B tsop40 chips
OK so, I have purchased the below adapter with the intention of using with MBM29F033C-90PTN, 29F032B, and 29F016B Tsop40's
SOP Adapter III
http://www.buyicnow.com/it.php?i=396
Q1: Looking at the pictures for the use with 29F016B, there appears to be a solder bridge of some kind on R3, is this required to program/operate the 29F016B only?
I am planning to purchase a GQ-4X which is a Willem cos of my issues with the TL866/Tsop40A combo
Q2: They have a Willem programmer board available, which would I need to use in order to program the chips on the SOP adapter board III as they have 3 types of "DIP40-DIP36 Programmer Adapters"?
How is this connected or wired in order to program?
Q3: I also have a TSOP-willem board from https://oshpark.com/shared_projects/Et6HIToH can I use this instead with the SOP Adapter III?
Q4: What would be the easiest way to program a SOP Adapter III myself?
Q5: Is there a way to program SOP Adapter III on a TL866CS?
Thanks
MS