So I've got my copynes up and running again, and I've got a stash of new Sachen games...
Well, my plan was to figure out how to dump them using the CopyNES Win32 Client, and then once I had the proper working plugin & mapper / Unif boardname, dump them with Bootgod's db to submit the results. What I am running into, however, is that I my plugin / mapper combinations that worked on the win32 client don't work on bootgod's db software. In an example, Bingo 75, the output of the .nes file in nestopia give me:
Ines: mapper 144 set
Board: AGCI 50282
Board: 64k PRG-ROM
Board: 32k CHR-ROM
On the one I dumped from the CopyNES Software,
and:
Ines: mapper 144 set
Board: AGCI 50282
Board: 64k PRG-ROM
Board: 8k V-RAM
On the NesCartDB Software
using the same plugin (Sachen3.bin) and mapper (144), and unif board (UNL-SA-72008)
Has someone run into discrepancies like this?
Is there something I can set to make the db software dump the same way the other software did?
Well, my plan was to figure out how to dump them using the CopyNES Win32 Client, and then once I had the proper working plugin & mapper / Unif boardname, dump them with Bootgod's db to submit the results. What I am running into, however, is that I my plugin / mapper combinations that worked on the win32 client don't work on bootgod's db software. In an example, Bingo 75, the output of the .nes file in nestopia give me:
Ines: mapper 144 set
Board: AGCI 50282
Board: 64k PRG-ROM
Board: 32k CHR-ROM
On the one I dumped from the CopyNES Software,
and:
Ines: mapper 144 set
Board: AGCI 50282
Board: 64k PRG-ROM
Board: 8k V-RAM
On the NesCartDB Software
using the same plugin (Sachen3.bin) and mapper (144), and unif board (UNL-SA-72008)
Has someone run into discrepancies like this?
Is there something I can set to make the db software dump the same way the other software did?