Originally posted by: Lincoln
did you recycle an old thread? don't do that, nothing before your post today will make any sense. just make a new thread.
it's hard to tell from the small pics but that might be a non-conductive damage, and it's probably high enough on the pin where it sits above the pin connector. that may take some repair work.
probably unrelated but is there printing on the rom chip? It doesn't show in the photos, and it'd be strange if it was blank.
1) I would prefer to keep one "Help Wanted" thread together to cause less clutter and to allow others to chime in on past issues if they want to. I placed the info I added to the first post where my new quesiton begins, so hopefully it makes more sense.
2) I cleaned it again, the pins are completely clean, but the graphics are still garbles on Spawn and some random enemies.
3) New pics of pins.
4) There is print on there, but I guess the lighting was bad on it. I use my cellphone, so yea... no professional photo studio here.
Any new thoughts after new pics?