Hey all!  Been loving my AVS and have been going through my little catalogue of games to re-experience them.  So far all have been perfect had one strange issue.

In Power Blade 2 there seems to be a black bar on the very left of the screen with maybe about one pixel to the left of that shown. 

I also have the Left side "hide" option on and using the most current firmware.  Are there any other games that have any little visual issues?

Double Dragon II has extra pixel data at the bottom of the screen. Nothing too bad, but it can be a little distracting in some areas.

Edit - misunderstood. Need sleep

Thats a problem with the game, not AVS. I can see the same thing when playing it on my NES and Famicom.

Ok, I did not remember that as a kid. I haven’t played it on original hardware in quite awhile. 
 

You can only see it if the TV has the bottom portion out of whack. My tube needs adjusting.  

I was looking for the glitch in Marble Madness, but I didn't see it.

Let me double check mine again.  I had a feeling this would happen hah.  Also its possible it could be because of the different style PCBs?  

EDIT:  Yep didn't show up again.  But it absolutely does for PB2 as ive played it a couple of times.

Do you have a copy of TMNT you could try? I had left side hide turned on inadvertently playing that and had a same pixel column on the far left that sounds like what you experienced.

Not sure if I'll get to it tonight but I'll try my PB2 and see if I see the same thing.

I just checked and it didn't have it.  Then I turned on left side SHOW and it was exactly what I was talking about.  I then put in PB2 and even with SHOW or HIDE it was still there.  Lemme know what you see.

Mine can't play Terminator 2, but the game plays fine on my toploader. It displays the opening splash screen and the title screen fine, but everything after that is wrong or corrupted, and the screen is black once gameplay starts.  T2 has one of those weird Acclaim circuit boards.  Maybe that has something to do with it?

Turn off extra sprites

That worked, thanks. I feel stupid...

Tried some more games on my AVS today (the 3 PAL Batman games).
I have issues with one of them: Batman: Return of the Joker (PAL)

Settings don't seem to matter.
I tried PAL mode (obviously) but also NTSC mode and each with Extra Sprites on and off.

Stages 1, 2 and first boss mode run fine. I beat the boss. Crashes with black screen.  

EDIT:
Above testing was done with v1.30.
I downgraded to v1.10 and... now I can continue playing after finishing the 1st boss!
So it seems to be a FW issue. I was also having issue with Commando (separate thread), I will test that again with v1.10 after I finished playing Batman: Return of the Joker.
Settings used now: PAL mode / no extra sprites. NTSC mode glitches in stage 1-2.

EDIT 2:
Just to verify I have installed v1.30 again. Crashes after 1st boss.
Downgraded back to v1.10 - no crash.
Also, Commando is still crashing on me with v1.10... :-/

EDIT 3:
I informed retroUSB via Facebook and they got back to me very fast.
It seems they are aware that v1.30 breaks some PAL games and they hope to have PAL fixed with the next Firmware update.
I was able to play Batman: Return of the Joker PAL from beginning to end on Firmware v1.10 by the way.