Hey everyone!

I was just trying to make myself a copy of parallel worlds remodel, but its not working.

Im not sure if my mode was incorrect as this is the first time ive tried it this way.

I was using a board from NBA live 95 and two 27C801 eproms and the fixed version of the patched rom that corrected the intro screen problem.  When I did the swapbin through wasabi, I ended up with  two files, one being the 1024 KB and the other being 512 KB.  I concatenated the file up to 1024 and then burned the two seperate eproms. 

Sorry, no pictures of what the final product was right now, but I've not had an issue with any of my repros to date.  I was wondering if there was an issue with the swap bin and concatenating a file causing it not to load. 

And yes, I did test the board and rom prior to soldering in the new eproms lol. 

Regarding what happens when I try to load the game, It does nothing.  My TV simply says "no input found" as if i turned on the SNES with no game.  I have no issues loading other games, just the repro i just tried.

Any input?

EDIT:  yep, I did the 24 <--> 31 pin rewire on both eproms too lol.

Did you put chip 1 on the bottom and chip 2 on the top?

Sorry for the delay, but yes.

Interesting!

You need to pad the file BEFORE swap bin.

If you get a boot but immediately hear the sound for Link swinging his sword you failed / there's an address line problem.

You using the copy /b command or are you just doing this by hand in hex editor when it comes to padding?

ahhh thats what i didnt do. I did the swap bin first.

then with the 2nd 512k file I did the copy /b command.

I would recommend Lunar Expand to expand snes games, way easier. Then, as stated before, do the swapbin.

good stuff thanks guys! ill try to reprogram it again within the next few days.

I appologize for hijacking your thread, but I decided I'm gonna try to make a repro of this. I have a Troy Aikman Football with a SHVC-2A3M-11 board in it as well as two 27c801 eproms. I was wondering what is the exact re-wiring you had to do with the pinout of the eproms?

If you're using swapbin just swap pins 24 and 31