NintendoAge http://nintendoage.com/forum/ -Sqooner Matching Four Score Wires To Controller Wires http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=26930 2009-12-19T19:54:31 -05.00 zi 5 Originally posted by: bunnyboy

I am almost certain the Four Score has no Zapper support. I replaced all the wires so I don't know the colors, but this has the Four Score hardwired in with the buttons sticking out the side.  Original ports were used and 2 more added.  The original ports still have their Zapper wires connected too.  Thats an old dev system I don't use anymore, should make a better one...


0

Sounds like something you should auction off if you're not using it anymore...

]]> Matching Four Score Wires To Controller Wires http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=26930 2009-12-19T17:02:37 -05.00 zi 5

0
]]> Matching Four Score Wires To Controller Wires http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=26930 2009-12-19T15:19:42 -05.00 zi 5
i still don't have zapper support using the 4 score, but since the 4 score doesn't have any wiring to connect to 6 adn 7 (blue and purple on the deck's controller 1 input), it doesn't seem like it would work.


so:

-could someone let me know if they have zapper support (test duck hunt) with the four score (make sure you're on two player)
- has anyone else hardwired their four score to their nes console during a mod? before and after pics? ]]> Matching Four Score Wires To Controller Wires http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=26930 2009-12-19T03:56:28 -05.00 zi 5 but sounds like one of my projects that im doing

]]> Matching Four Score Wires To Controller Wires http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=26930 2009-12-19T03:48:46 -05.00 zi 5
I've essentially broken my nes down to barebones, stripped off the controllers (just wires coming out of player 1 and 2) and, in the interest of being able to play 4 players with the completed console, decided to hardwire a four score into the nes.

so, being kinda smart i wrote down what color wires match what pins, and for the most part it works. except for 4 player games. always a fail.


SO! I ask you, the nes dev community for help. where can i find (or can you post up) what pin numbers (wire colors would be even better, but i'll deal) from the four score connect to player one and two.

I have:

4 score -> NES
CONTROLLER 1
blue-> brown
orange-> red
brown-> orange
red-> yellow
purple-> purple

CONTROLLER 2 (i think this is the prob)
green-> red
yellow-> yellow

does this make sense to anyone? has anyone done this before?

]]>