NintendoAge

CopyNES USB available at retrozone

albailey — 2008-05-25T15:17:42 -05.00

You're welcome.

CopyNES USB available at retrozone

albailey — 2008-05-25T13:21:00 -05.00

Will try that! Thank you!

CopyNES USB available at retrozone

albailey — 2008-05-25T12:39:32 -05.00

Sounds like your video signal is interfering with your audio signal......try better quality cables (with shielding inside)

CopyNES USB available at retrozone

albailey — 2008-05-25T12:26:54 -05.00

OK sill need help! It still has a noise on it. I just happened to unplug the video cable first and the noise went away? And it comes back when I plug it back in. Very strange!! Can any one think of any thing that might be the problem??

Thank you,
Matt

CopyNES USB available at retrozone

albailey — 2008-03-11T05:29:46 -05.00

Thank you for your help!!!

CopyNES USB available at retrozone

albailey — 2008-03-03T12:23:27 -05.00

If youd like to send it to me to look at bigmatt let me know, I have done 3 and have a 4th one that is in the mail. I have had no problems with any of them and would be happy to look it over for you.

CopyNES USB available at retrozone

albailey — 2008-03-03T09:57:28 -05.00

Originally posted by: Bigmatt

Just looked at it again that is not the problem. I am lost now!! If any one can think of anything else let me know!

Thanks,
Matt

Post a high res pic of the Nintendo board (the side where you did all the soldering, etc..). Its doubtful we can help, but you never know. Someone might see something.

You could also try posting on nesdev.com in the hardware/copynes section.

CopyNES USB available at retrozone

albailey — 2008-03-02T18:18:04 -05.00

Nice that should be a big help. Thanks

CopyNES USB available at retrozone

albailey — 2008-03-02T18:15:00 -05.00

Here's a NES games mapper list.
http://tuxnes.sourceforge.net/nesmapper.txt

CopyNES USB available at retrozone

albailey — 2008-03-02T03:34:11 -05.00

I successfully dumped SMB/DH and FF1 carts tonight. Im happy now I have a new toy. Thanks again to shags2dope50187 for installing this thing for me!

I was wondering though, is there a way to find out what mapper to use if its not listed on a cart and its not in the NA database? If theres a list of them out there that would be great.