http://nintendoage.com/forum/ -Sqooner http://nintendoage.com/forum/messageview.cfm?catid=34&threadid=186692 2019-04-23T01:43:48 -05.00 qwertymodo 9 http://nintendoage.com/forum/messageview.cfm?catid=34&threadid=186692 2019-04-22T17:11:20 -05.00 qwertymodo 9 http://nintendoage.com/forum/messageview.cfm?catid=34&threadid=186692 2019-04-16T13:30:39 -05.00 qwertymodo 9 http://nintendoage.com/forum/messageview.cfm?catid=34&threadid=186692 2019-04-13T13:36:52 -05.00 qwertymodo 9 http://nintendoage.com/forum/messageview.cfm?catid=34&threadid=186692 2019-04-11T05:43:54 -05.00 qwertymodo 9 http://nintendoage.com/forum/messageview.cfm?catid=34&threadid=186692 2019-04-11T04:46:00 -05.00 qwertymodo 9
Anyway, I'm interested in this SNES Jr, so I'll start things off with the initial bid.

$200 ]]> http://nintendoage.com/forum/messageview.cfm?catid=34&threadid=186692 2019-04-10T16:26:25 -05.00 qwertymodo 9
Edit: Ok, I've edited the original post with better descriptions of the mods, including links with more information (no auction terms were modified). ]]> http://nintendoage.com/forum/messageview.cfm?catid=34&threadid=186692 2019-04-09T23:26:19 -05.00 qwertymodo 9 http://nintendoage.com/forum/messageview.cfm?catid=34&threadid=186692 2019-04-08T21:44:29 -05.00 qwertymodo 9

RGB bypass (THS7374) with proper attenuation

• Enables high-quality RGB video output via SCART cables
• Proper attenuation fixes the overly bright picture output of the SNES Jr.

S-Video and CSync restored

• Restores S-video output for consumer TV's without RGB or component inputs
• Restores CSync output for professional monitors which do accept RGBs input, but require clean CSync instead of composite video as a sync source

De-ghosting capacitor replaced

• Fixes an issue with the SNES Jr. PPU that causes ugly "ghosting" artifacts

Digital audio output (CS8406 encoder)

• Enables clean, high-quality pure digital audio output for supported receivers

Outputs both coax and optical signals via 3.5mm mini-TOSLINK jack

• Allows the digital audio output to use whichever interface you prefer

APU ceramic resonator replaced and upgraded to a crystal oscillator

• Provides a more accurate and stable APU clock to eliminate audio dropouts via the digita output

Light-piped power LED installed

5V regulator replaced and upgraded to 1.5A UA7805

• Increased power supply capacity for better reliability with flash carts and other power-hungry accessories

All electrolytic capacitors replaced with genuine Nichicon parts

• Increased reliability, as elecrolytic caps tend to fail with age
• Nichicon capacitors are well-regarded for their high quality and longevity

Partial region-free mod

• Enables playing both USA and JPN carts
• PAL carts are not supported

Initial bid is $200, $5 increments.  US domestic shipping via USPS Flat Rate box included.  Other shipping options (including international) are available, but covered by buyer.  Attached images are of the actual unit for sale.
  ]]>