http://nintendoage.com/forum/ -Sqooner http://nintendoage.com/forum/messageview.cfm?catid=8&threadid=161223 2016-04-22T08:29:40 -05.00 dmvanmeveren 2 3) you need to buy a multi out to scart. You will want one with csync unless you have the 1chip-03. Get this one for csync http://m.ebay.com/itm/Super-Nintendo-stereo-RGB-SCART-lead-SNES-CSYNC-FULL-SHIELD-GROUNDED-cable-/201284360714?nav=SEARCH
And this one for luma sync http://m.ebay.com/itm/Super-Nintendo-SNES-RGB-N64-sync-on-luma-RGB-SCART-lead-SHIELDED-GROUNDED-cable-/161569281372?nav=SEARCH
4) the xrgb comes with a jp21 adapter, and if you are handy with a soldering iron you can open it up and rewire it. Otherwise you can get one of thesehttp://m.ebay.com/itm/Micomsoft-XRGB-Mini-Passive-adapter-for-Euro-SCART-to-XRGB-Mini-8-pin-/201294067744?nav=SEARCH
Hope this helps ]]> http://nintendoage.com/forum/messageview.cfm?catid=8&threadid=161223 2016-04-21T18:42:50 -05.00 dmvanmeveren 2
1.) I'm getting a Framemeister once I have enough saved, which should be in the next two weeks
2.) I have an NTSC 1-chip SNES, but how can I determine whether or not it is a 3rd revision 1-chip?
3.) Which cable, specifically (give a link if you can) do I need to plug into my physical SNES? Is it technically a SCART cable plugging into the A/V multi out port?
4.) Which converter do I need (again, give a link if you can) to plug into the end of the SCART cable to convert from SCART to RGB?

Thanks in advance!

<3 ]]>