NintendoAge http://nintendoage.com/forum/ -Sqooner Legend of Zelda - GoW and PW Multi Cart http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=138133 2015-12-12T13:45:48 -05.00 MrPete1985 14 thank you.
Is it possible to do a Cartride with 4 Games (like Zelda Ancient Stone Tablet), without using a Super Metroid PCB? ]]> Legend of Zelda - GoW and PW Multi Cart http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=138133 2015-07-17T18:53:39 -05.00 MrPete1985 14 Originally posted by: Rodragon

Can I use other TSOP adapter? like I or III?

Don't see why it would not work, I think the 2 has some address lines mixed up though double check what line you are connecting the switch to ]]> Legend of Zelda - GoW and PW Multi Cart http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=138133 2015-07-17T18:03:33 -05.00 MrPete1985 14 Legend of Zelda - GoW and PW Multi Cart http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=138133 2015-02-19T12:28:25 -05.00 MrPete1985 14 Legend of Zelda - GoW and PW Multi Cart http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=138133 2015-01-25T18:37:26 -05.00 MrPete1985 14
]]> Legend of Zelda - GoW and PW Multi Cart http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=138133 2015-01-11T20:56:31 -05.00 MrPete1985 14
It'll come in useful in other areas as well. I recently used it to repair a paging system with worn out conductive pads on the rubber membrane by disconnecting a ribbon cable and wire-wrapping switches to the header for the worn keys. I plugged the header back on to restore all the other keys and it worked perfectly. ]]> Legend of Zelda - GoW and PW Multi Cart http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=138133 2015-01-08T15:18:51 -05.00 MrPete1985 14 Legend of Zelda - GoW and PW Multi Cart http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=138133 2015-01-08T14:40:21 -05.00 MrPete1985 14
Not too sure how that would work with the swap bin though, you might need to just hand wire the 5 different wires.

Not families with the 27C810 chip but it should be the same process, just connect to the highest address line. ]]> Legend of Zelda - GoW and PW Multi Cart http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=138133 2015-01-08T13:34:48 -05.00 MrPete1985 14 Legend of Zelda - GoW and PW Multi Cart http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=138133 2014-11-14T08:31:27 -05.00 MrPete1985 14 Originally posted by: eric.of.troy

Aye sir, Thank you! This is awesome. Would this work for hirom titles as well?

I have a few 128K sram hirom SFC donors laying around I could use for something like this if so.


This will work for HiROM games as long as you pick 2 that will fit on a single chip and expand them to 16mbit each.

Originally posted by: PiM-Games

Is the SRAM off of a cart or was it bought separate?



Got it from mouser
http://www.mouser.com/Search/ProductDetail.aspx?R=AS6C62256-55PCNvirtualkey56240000virtualkey913-AS6C62256-55PCN

If you want to use a player choice copy of Mario Paint that will work also as it has a 1A5M board.

Some of the Sim games use 256k SRAM but it is hit or miss on the 36 DIP support, best option is to upgrade a 1A3M board. ]]>