http://nintendoage.com/forum/ -Sqooner http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=137848 2015-01-18T11:48:40 -05.00 MrPete1985 15
When I was testing the ancient stone tablets on real hardware I saw that some bugs (that always were there in the first run of game) were dissapearing when I was in my second run of the game...

The reset line only restarts the ppu, and not sure but the cic check too. ]]> http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=137848 2015-01-18T08:50:53 -05.00 MrPete1985 15 http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=137848 2015-01-12T11:14:01 -05.00 MrPete1985 15 http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=137848 2015-01-12T05:19:59 -05.00 MrPete1985 15 Originally posted by: CZroe

Can this be made to work between an original ROM and an EPROM? IOW, can I make a repro out of another game and switch between the original game and the repro game without dumping the original and putting it on the same chip as the repro ROM?

Even if I can't, this is still awesome. I can put the English and Japanese game on the same game pak!


If they both fit on a single chip and are the same size you could, you would probable have to upgrade the SRAM, I think most of the translations cannot load an original SFC save file.

If you wanted to use multiple chips and switch between the 2 chips you would have to add an inverter connect the /CE lines to the board ]]> http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=137848 2015-01-11T20:42:31 -05.00 MrPete1985 15
Even if I can't, this is still awesome. I can put the English and Japanese game on the same game pak! ]]> http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=137848 2015-01-05T18:26:56 -05.00 MrPete1985 15
You could also connect the an address line to Q1 like I said before but I only needed to switch between 2 games so that's why I did not make a via for it. ]]> http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=137848 2015-01-05T17:51:48 -05.00 MrPete1985 15
pcb assembly parts ]]> http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=137848 2014-12-30T17:13:01 -05.00 MrPete1985 15 Originally posted by: Pendragonx

/bookmarked 'cuz Awesome

MrPete1985 ++


Just noticed that I need to fix the new PCB don't go having the boards printed just yet

EDIT: OK it's fixed ]]> http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=137848 2014-12-30T16:04:12 -05.00 MrPete1985 15
MrPete1985 ++ ]]> http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=137848 2014-12-09T19:06:16 -05.00 MrPete1985 15