http://nintendoage.com/forum/ -Sqooner http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=172710 2017-04-14T15:20:16 -05.00 h0rzhound 2 Secondly, cart connector #46 is A21 and you'd have to solder directly onto it.

MAD-1 Pin 1 goes to EPROM #2 /OE
MAD-1 Pin 16 goes to EPROM #1 /OE

If only using 1 EPROM connect /OE to MAD-1 Pin 4

Obviously (not tested) the MAD-1 only decodes A20/A22 leaving A21 disconnected since A19 being the highest address line here for EPROMs.

Since your EPROM/FLash has A21, you'd have to rewire MAD-1 Pin 12 and 13 probably. ]]> http://nintendoage.com/forum/messageview.cfm?catid=22&threadid=172710 2017-04-05T22:32:25 -05.00 h0rzhound 2
https://snescentral.com/pcbboards.php?chip=SHVC-2J3M-11 ]]>